How to Unlock Huawei T330 by code?

Factory unlock code of Huawei T330 is available at Means, if your phone is asking for unlock code, then it can be easily unlocked. This unlocking method is the fastest and risk-free to make your device network-free. Unlocking by code does not involve any hardware or firmware change, means you are not going to lose the warranty of your phone.

All major carriers are supported for unlocking including ATT, SoftBank, T-Mobile, MetroPCS, Telstra, Optus, Xfinity Mobile, Cricket, EE, Vodafone, Orange, O2, 3 UK, Virgin mobile, Rogers, Fido, Bell, Telus, SFR, Bouygues, Movistar, TIM, TMN, A1, Telekom, Chatr, Koodo, Mobilicity, MTS, Sasktel, Zoomer, etc. To generate the correct SIMlock code of Huawei T330, we need only 15-digit IMEI. You can find out the correct 15-digit unique IMEI by dialing *06# as a phone number or you can also check in the settings.

Since the factory unlock code directly comes from Huawei server, we don’t need any another information except IMEI. The code will be 100% genuine and will work fine.

Once order placed, you will get the following types of codes:

NCK – NCK of Network Code will remove the main network restriction from your Huawei T330.

SPCK – Service Provider Code or Subset Unlock PIN will remove the network restriction from the subset network (e.g. Tesco in the U.K.).

SIMLock Block Unlock Reset Key – “SIMLock Block Unlock Reset Key” will be used to reset the code counter if you have already tried with so many wrong codes on your Huawei T330.

Note: In a few cases, you may get only NCK or Unlock Code, if in the database only one set of codes will be available.

How long we need to wait for a Huawei unlock code?

The approximate delivery time for a Huawei phone unlock code is 1 to 10 days.

The average response time for a Huawei phone unlock code is 2 days (based on last 100 orders).

How to Unlock Huawei T330 by Code?

You may get up to 4 codes, depending on the network provider.

1. Switch Off the Huawei T330 phone.

2. Insert any unacceptable SIM card on the device.

3. Switch ON the phone.

4. When the device asks for the code, enter the first code which is provided by

6. If the first code doesn’t work then you can try with the second or the third.

Now your Huawei T330 should be network-free.

If the above-mentioned steps don’t work for you, then enter the last code. You should see “confirm unsuccessful” message. Now again enter the previous codes.

Leave a Reply

Your email address will not be published. Required fields are marked *