Unlock Code of Huawei E560 Router is available at cellcute.com. Means, if your device is asking for SIMLock code after changing the SIM card then it can be easily unlocked. Unlocking means making the device network-free is one-time work. After unlock you can use the default as well as other carriers SIM card. Once the router is unlocked, you can easily sell it at higher cost.
How to Unlock Huawei E560 Router?
Before proceeding with steps, make sure your device is connected to a static power supply or battery is charged at least 20% (if the device supports battery).
1. Reset the device from its reset button.
2. Switch off the Huawei E560 router.
3. Remove the default SIM card and insert any other carrier SIM card.
4. Plug the device from PC using its WiFi or USB cable.
Note: If connected through USB cable, then open My Computer >> Virtual CD-ROM and install the required software in PC.
5. It will automatically open the default page of the router (192.168.1.1 / 192.168.0.1 / 192.168.8.1).
Note II: In case, it does not browse for its default IP address, try to restart the PC or device.
6. Login to the Huawei E560 with admin privilege.
Note III: To get the login details remove the battery and check or see the router manual.
7. It should redirect you to the unlocking page, where you will find an option to enter the code with a name of NCK / SIMLock Code / Unlock Code.
8. Enter the correct code of Huawei E560 which is provided by cellcute.com.
9. Click Apply / OK.
10. Once the code is accepted by the modem, it will be unlocked permanently.
Note IV: The Huawei E560 may be rebooted to display the network. Wait for a few minutes to see the network, if not, then again reset the device.
11. Once the router starts showing the network, create a new profile according to the SIM card.
12. Now connect to the internet.
If the above-mentioned procedure does not work for you, leave a comment before placing an order.